aDriv4 website!

Linux host.brandservicecorps.com 3.10.0-1160.59.1.el7.x86_64 #1 SMP Wed Feb 23 16:47:03 UTC 2022 x86_64
Apache
66.29.156.133

ChangeLog

2013-10-09  Zdenek Pavlas <zpavlas@redhat.com>

* lots of enahncements and bugfixes
	  (parallel downloading, mirror profiling, new options)
	* updated authors, url
	* updated unit tests
	* bump version to 3.10

2009-09-25  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/__init__.py: bump version to 3.9.1

2009-09-25  Seth Vidal <skvidal@fedoraproject.org>

* makefile: clean up everything in make clean

2009-09-25  Seth Vidal <skvidal@fedoraproject.org>

* test/runtests.py, test/test_grabber.py, test/test_keepalive.py,
	urlgrabber/__init__.py, urlgrabber/byterange.py,
	urlgrabber/grabber.py, urlgrabber/keepalive.py,
	urlgrabber/mirror.py, urlgrabber/progress.py,
	urlgrabber/sslfactory.py: cleanup all the old urlgrabber urllib code
	that's not being used delete sslfactory and keepalive fix up the
	unittests to match the existing code

2009-09-24  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: update documentation for ssl options and
	size/max_header_size options

2009-09-23  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: - fix the reget testcases (and regets in general) with the max size
	check - make the errorcode more obvious when we go over the range -
	obviously don't do the check if all of our max values are None (or
	even 0 since that is a silly number for a Max)

2009-09-22  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: handle endless-data problems safely:  "A
	malicious server could cause libcurl to download an infinite amount
	of data, potentially causing all of memory or disk to be filled.
	Setting the CURLOPT_MAXFILESIZE_LARGE option is not sufficient to
	guard against this.  Instead, the app should monitor the amount of
	data received within the write or progress callback and abort once
	the limit is reached."  had to restructure a good bit of the error
	handling to do this but it works for both endless headers and
	endless content.

2009-09-21  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: make sure the value we get back from the
	parse150 and other calls is converted to an int before we make it
	'size' rhbug: #524705

2009-09-02  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: make file:// url not found msgs clearer and
	hopefully fix a couple of ctrl-c issues.

2009-08-27  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: make proxy=_none_ properly disable all
	proxies as per the docs

2009-08-14  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: - add full contingent of ssl options:   - client keys   - client
	certs   - capath/cainfo   - client key passwords   - client key and
	cert types   - verifypeer/verifyhost - add a number of common errors
	to do_perform() - when an error is unknown, and doesn't make sense
	report complete pycurl error code - when the filename is '' and not
	None and we're doing a urlgrab() try to open the   file anyway
	rather than silently swallowing the data into a StringIO and
	discarding it.

2009-08-13  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: add _to_utf8() method to pycurlfileobject
	make sure postfield data is to_utf8'd before setting the option
	otherwise pycurl is unhappy if the postfield data is a unicode
	object instead of a string object. closes rh bug
	https://bugzilla.redhat.com/show_bug.cgi?id=515797

2009-08-12  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: initial pass at setting more advanced ssl
	options. verify peer and verify host work as expected.

2009-08-07  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: keep from making tmpfiles all over /tmp on
	any local file:// urlopen() by doing it in StringIO instead of
	mkstemp().  Sort of fixes
	https://bugzilla.redhat.com/show_bug.cgi?id=516178

2009-08-06  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: - fix intrrupt handler and document why keyboardinterrupt is going
	to be so weird in pycurl - disable signals and make sure we don't
	handle/intercept any in the pycurl code. - set 'check_timestamp'
	regets as NotImplemented. The work around is multiple connections.
	it is possible but not immediately useful since, afaict, NOTHING
	uses the check_timestamp regets.

2009-08-05  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: - make sure regets work when our filename is unicode - make sure we
	are not resetting self.append = False when we don't need to

2009-08-05  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: - make sure we tell pycurl to get the filetime when downloading -
	set a couple of options as 'True/False' instead of 1,0 - for
	readability - make sure the option passed to timeout is an int - not
	a string

2009-08-04  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: missed setting the value from opts.timeout
	- doesn't really HURT what will happen b/c if your connect takes
	longer than 5minutes then you're SCREWED

2009-08-04  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: handle timeouts more correctly (with the
	exception) and set timeouts to be connect timeouts since libcurl
	seems to actually honor timeouts - as opposed to urllib. closes rh
	bug # 515497

2009-07-31  Seth Vidal <skvidal@fedoraproject.org>

* ChangeLog, makefile, urlgrabber/__init__.py: changelog + release
	date touchup

2009-07-31  Seth Vidal <skvidal@fedoraproject.org>

* makefile: add a few more things to be cleaned out

2009-07-31  Seth Vidal <skvidal@fedoraproject.org>

* ChangeLog: update changelog

2009-07-31  Seth Vidal <skvidal@fedoraproject.org>

* urlgrabber/grabber.py: - make readlines() work for mirrorlists in yum (which probably
	shouldn't be using it anyway) - do a do_grab() in _do_open() which
	may or may not be a good idea - I could also make the _do_grab()
	happen when someone attempts to hit a method beyond the file object
	open